DFAB HOUSE
DE/EN
  • NEWS
  • ABOUT
    • DFAB HOUSE
    • NCCR DIGITAL FABRICATION
    • NEST
  • INNOVATIONS
    • IN SITU FABRICATOR
    • MESH MOULD
    • SMART SLAB
    • SMART DYNAMIC CASTING
    • SPATIAL TIMBER ASSEMBLIES
    • TRANSLUCENT FAÇADE
    • DIGITAL LIVING
  • PARTNERS
  • PUBLICATIONS
  • MEDIA
    • MEDIA RELEASES
    • PRESS ARCHIVE
  • CONTACT
    • VISIT US
    • CONTACT US

Month: July 2018

Researchers fabricate intricate 80m2 concrete slab using 3D sand printing

Smart Slab on top of the Mesh Mould wall

Smart Slab is the world’s first full-scale architecture project whose formwork bases on large-scale 3D sand printing.

DFAB HOUSE project team celebrates the topping out

Spatial Timber Assemblies modules being mounted on the construction site

After the timber modules had been assembled, the project team celebrated the topping out.

Recent Posts

  • “How to Build a House” opens in New York
  • How to Build a House Exhibition Opens at swissnex San Francisco
  • DFAB HOUSE is officially open!
  • Robotically fabricated concrete façade mullions installed in DFAB HOUSE

News Archive

  • August 2020
  • September 2019
  • March 2019
  • February 2019
  • November 2018
  • July 2018
  • June 2018
  • May 2018
  • March 2018
  • October 2017
  • June 2017
  • May 2017

Project Initiators

image description ETH Zurich logo Empa Logo

Copyright: © 2023
NCCR Digital Fabrication | Imprint | Data protection